| Lacquers, oil and wax parquet preservations |
|
|
UZIN -MF 94
One-component parquet water-based lacquer half-opaque for usual wood species. Spending rate: 80-120 g/sq.m. Ready for polishing: in 2 hours. Final resistance: in 8 days. Application area: polished parquet and wooden floors in apartments. For dwelling premises. Applied in two layers after coating . |
|
|
UZIN -MF 95
One-component parquet water-based lacquer with no smell, inflammable, well flowing. Application area: for parquet and other wooden floors of normal loads. MF-95 is applied for internal works, to open hard and soft wood. It fits exotic wood, as well as heated floors, floating floors, industrial parquet. |
|
|
UZIN MF 96
One-component parquet water-based lacquer half-opaque for usual wood species. Spending rate: 90-120 g/sq.m. It is very resistant to wearing out and to chemicals. Ready for polishing; in 3 hours. Final solidity: in 8 days. Application area: polished parquet and other wooden floors, polished cork floors, ready parquet. For high loads in dwelling and public buildings. Applied in 2 layers after coating. |
|
|
UZIN MF 97
One-component polyurethane-acrylat dispersion based lacquer. With no formaldehyde, weak smell, inflammable, well flowing and fast hardening. Application area: polished parquet and other wooden floors. For internal works. The wood with many natural substances and dirty wood are to be covered with closing coating MG-318. |
|
|
UZIN- MF 98
Two-component polyurethane parquet lacquer. Spending rate: 100-130 g/sq. m. Very resistant to wearing and to chemicals. Ready for polishing: in 4 hours. Final solidity: in 8 days. Application area: polished parquet and wooden floors, polished cork floors, ready parquet. Applied in 2 layers after coating in the premises with high loads. . |
|
|
UZIN MF-86-DD
One - component lacquer based on DD - materials . Convenient to work with, well flowing and fast drying. Strong resistance to wearing and chemicals. Without aromatizers. Application area: parquet floors. Very well for zones with high loads, such as steps, school and office floors. Not to apply on the floors with sticking of planks side walls. Material spending rate and drying: 5- 10 sq. m for a layer depending on the work type and foundation characteristics, Ready for polishing and further work: in 4 hours. Final hardening is in 4 days(*). |
|
|
UZIN MH-80
A ombinztion of natural oils and wax as preservation based on modified soy fat acid and lacqueringoil as well as wax components. With little solvent and no harmful substances, it is convenient to work with. Application area: MH-80 preservesfresh-polished new and old wooden floors from hard and soft tree including wooden floors. Preservation penetrates the wood and creates the surface with open pores. By inflammation, this product creates penetrating rustic silk and opaque effect. Exotic wood must be preserved after preliminary probation. No sticking in planks sidewalls. Material spending rate and drying : 4 m 2/ l (oak wooden pavestone) – 35 m 2/l (bamboo) – on a layer depending on absorbing capacity of the foundation. Ready for further work – in 4 hours . Ready to step on virtually right away (when instruction is fully observed). Ready for wet cleaning – in 7 days ( avoid making water pools ). Drying data is based on normal climate conditions according to DIN 50014. |
