UZIN (Germany)

Putties
	UZIN-MG 300 One-component water-based putty to fill cracks in Parquet. Mixed with wooden powder from parquet polishing. Spending rate; 50-70 g/sq. m. Color: transparent. Ready for polishing: in45-60 min. For usual wood species, except for exotic ones. Application area: on the polished parquet and wooden boards .
	UZIN-MG 301 NC is a solution to be mixed with wooden powder. It has no color, it is convenient in work, fast drying NC-solution to be mixed with wooden powder (from parquet polishing with grain 120) to get spackling mass. Application area: spackling dimples, cracks and seams on parquet and other wooden floors, for internal works and general works with wood. It glues plank sides so it is not to be applied on boards or wooden pavestone. Material spending rate and drying: 140 ml/sq. m depending on the floor state. Ready for polishing in 15 min., fastens after approx. 1 hour depending on the thickness of spackling layer and climate conditions in the room. The data on drying is based on normal climate conditions according to DIN 50014.
	UZIN-MG 305 It has no color, convenient in work, fast drying NC-solution to be mixed with wooden powder (from parquet polishing with grain 120) to get spackling mass Application area: spackling dimples, cracks and seams on parquet and other wooden floors, for internal works and general works with wood. It glues plank sides so it is not to be applied on boards or wooden pavestone.